Wednesday, 5 February 2014

Vance & Hines Fuel Pak FP3 - Smartphone friendly. Available at Motorcycle Storehouse

Vance & Hines Fuel Pak FP3 - Smartphone friendly


Vance & Hines has developed a brand-new edition of their Fuel Pak, called the FP3, which will be ready to hit the market in March 2014. It is plug & play and loaded with more and better options than ever before for late model Harley owners. The FP3 will fit 11-14 Softail, 12-14 Dyna, 2014 Tourings and 2014 Sportsters. A must-have for those contemplating an exhaust or air cleaner change, but even with a bone stock bike remarkable results can be expected. 

Communication with your bikes fuel injection system is done via bluetooth with your smartphone, either Android or iPhone. 





Flash technology is used to recalibrate the fuel map. Stationary manual adjustments will let you adjust the fuel map, EITMS (Engine Idle Temperature Management System) and idle speed, AFR (Air Fuel Ratio) can be set slightly richer or leaner. Ignition timing can be adjusted and includes a rev limiter. New maps can be downloaded from Vance & Hines and through the on-bike sensors the system can be run in AutoTune mode, which enables the bike to recalibrate the fuel map real time to the specific conditions and even quality of fuel that is used. When the Android or iPhone is installed on the bike, live sensor data, like speed, RPM, cylinder head temperature, voltage, gear selection etc. can be seen on the display of the smartphone. Obviously, once the FP3 is used on a bike it is ‘mated’ to that specific ECU. You will not be able to use the same FP3 for tuning another bike. 

If you’re ready to dial-in to perfection you can call your Motorcycle Storehouse dealer and ask for MCS 981958.
Vance & Hines Fuel Pak FP3, Bluetooth connectivity with iPhone or Android


No comments:

Post a Comment