Friday, 20 April 2012

Ride-On, tire sealant

Ride-On, tire sealant

Few things are worse than stranding with a flat, usually in the middle of nowhere. Ride-On is a manufacturer of a fluid which is added when installing a new tire, or one that is already on the bike, through the valve stem. After adding Ride-On the fluid will coat the tire on the inside, this will take approx. 4 miles (6km). After that Ride-On will automatically seal 85-95% of all leaks upto 6.4mm diameter in tubeless tires and 55-65% of all leaks upto 3.2mm in tube type tires. Since it will evenly disperse it acts as a wheel balancer, therefore wheel weights are no longer required. Rims are easy to clean when changing tires, just rinse off and wipe clean with a damp rag. The product is biodegradable, non-flammable, corrosion protective and compatible with TPMS (Tire Pressure Measuring Systems). Note that Ride-On is not compatible with TPMS systems that are not hermetically sealed, like 09-12 Goldwings. For all others, this could well be the best ride insurance you ever had! Available in a 8oz (237cc) bottle, as MCS 906001 and for dealers in a 5 gallon (18.92 liter) barrel as MCS 906002. A special manual pump for the 5 gallon barrel is available as MCS 906003.


For the first time you can give your Motorcycle Storehouse dealer a call, not to repair but to prevent a flat. Howabout that!

- Tire repair on the fly!
- Ride insurance in a bottle!
- TPMS safe!


No comments:

Post a Comment